With the rapid development of water treatment agents, the product has become more functional and environmentally friendly, and its wide range and practicality are not clearly calculated by us, mainly because it gives us Life has brought a lot of help, here is the introduction of its three powerful treatments.
Cationic polyacrylamide
The water treatment agent is incompatible with most organic solvents, has a good flocculation effect, and can effectively reduce the frictional resistance between the solutions. It is mainly used in sludge dewatering and industrial wastewater treatment. Should pay attention to the application:
(1) Use salt-free neutral water for product configuration.
(2) When dissolving, it is necessary to uniformly spread the agent into the stirring water.
(3) The agent is hygroscopic and needs to be stored in a cool dry place.
2.CF1 polyaluminum chloride
The water treatment agent is polymerized by an inorganic polymer coagulant and a natural polymer flocculant, so that it exerts its respective advantages and has a good effect on the treatment of organic contaminated raw water, and can be adapted to various forms of sedimentation tanks. Application notes:
(1) The liquid of the medicament may be directly added, or may be added after dilution, and the solid needs to be dissolved and used.
(2) The dosage of the drug needs to be measured according to the amount of treated water.
(3) Do not mix with other chemicals when using.
3. Anionic polyacrylamide
The agent is mainly used in mining wastewater treatment and oil field, geological drilling additives. The precautions for use are similar to those of cationic polyacrylamide. In addition, care should be taken to avoid the spread of the drug on the ground to prevent changes in the ground after moisture absorption.
