Factors Affecting The Amount Of Water Treatment Agent Used

Jul 03, 2019

Leave a message

We know that the use of water treatment agents in the purification of sewage, its use will be affected by many factors. So, do you know? In fact, its usage will be affected by many factors. This must be understood by the user to ensure that it does not waste or affect the normal water purification effect. Let's take a closer look at the factors that influence its usage.

First, as the season changes, the amount of water treatment agent needs to be adjusted. If the same water is treated, the amount used in winter is much higher than that in summer, because the winter water temperature is relatively low and the reaction speed is relatively slow, which leads to a large amount of water in winter, and a higher water temperature in summer. The dosage is small.

The onset of summer leads to an increase in water temperature. This temperature is very suitable for the growth of microorganisms in water. The increase in fertility also has a certain impact on water quality. This leads to the adjustment of the dosage of the medicament. In severe cases, the product model needs to be re-selected.

Second, the treatment of domestic sewage also needs to pay attention to changes in sewage water source, due to the increase in the amount of flushing water in the summer, and more rain, it will also affect the amount of use. When dealing with sewage, it is necessary to pay attention to the water source and the amount of water as the seasons and weather change. This is of great benefit to our work.

Third, the water quality has changed. In different industrial enterprises, the discharge of industrial wastewater is very inconsistent. The industrial wastewater of some factories is evenly discharged, but the discharge of wastewater from many factories varies greatly. Even some wastewater from individual workshops may be discharged once in a short time. In addition, with the new process of the factory and the emergence of new products, the water quality and quantity of urban sewage will also change continuously.

In summary, the factors affecting the use of water treatment agents are mainly sewage quality, water quantity change, urban conditions, people's living standards, the number of sanitary appliances, the geographical location of the city, the climate and the season, etc., all of which are more or less It has a certain influence, and needs to be adjusted when it is needed. I hope that you will be familiar with it.


Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now