With the continuous increase of various domestic sewage and industrial sewage, the problems of environmental pollution and water pollution have become more and more serious, so many sewage treatment products have emerged, and in the process of treating sewage by these products. The water treatment agent plays a significant role, and only after it has been treated can the water reach the discharge standard. So, what should we pay attention to when we add drugs?
1. Before dosing, carefully check whether the dosing pump, piping and valves of the dosing equipment are in good condition, and whether the valve is adjusted to the required working state as needed.
2. It is forbidden to distinguish chemicals with smell, taste or hand touch. It is forbidden to use unlabeled or unidentified drugs. It is strictly forbidden to mix incompatible chemicals.
3, the water treatment agent should be sorted and tidy, keep the label intact, and the principle of advanced use, do not mix drugs.
4. When applying the medicine, wear anti-corrosion gloves, long-sleeved work clothes, safety shoes, and careful operation.
5, the body accidentally contacted the agent, apply a large amount of water to rinse, seriously go to the hospital immediately.
6. If the water treatment agent leaks, it should be reported to the supervisor in time and rinsed with water until the source of the leak is detected.
7. It is forbidden to eat, smoke, play and play in the workplace, and remember to wash your hands after work and before eating.
8. When there is a wound on your body, do not let the medicine contaminate the wound.
The above is what we should pay attention to when adding water to the treatment agent. It contains a lot of different kinds of medicines, and different medicines have different performance effects. Therefore, we must not only operate correctly but also regulate our own. To be safe and protective, you can protect your personal safety and avoid unnecessary troubles.
